Nokia 6210 Navigator User Manual page 62

Slide handling — to edit the slide settings. See "Keypad lock (keyguard)," p. 18,
"Make a voice call," p. 20, and "Answer or reject a call," p. 22.
Sensor settings — to set which functions the accelerometer controls in your device
and activate specific sensor interactions.
Security — to change the device and SIM card settings, such as PIN and lock
codes; view certificate details and check authenticity; and view and edit security
modules
When security features that restrict calls are in use (such as call barring, closed user group,
and fixed dialing), calls may be possible to the official emergency number programmed into
your device.
Factory settings — to reset some of the settings to their original values. You need
the lock code.
Positioning (network service) — to change positioning settings. See "Positioning
settings," p. 36.
Phone
See "Call settings," p. 24.
Connection
Select > Settings
Bluetooth — to switch Bluetooth technology on or off, and edit Bluetooth
settings. See "Bluetooth connection settings," p. 69.
USB — to edit USB settings. See "USB connection," p. 71.
Destinations — to define the connection methods used for reaching a particular
destination
Packet data — to select the packet data connection settings. The packet data
settings affect all access points using a packet data connection.
• To set the device to register to the packet data network when you are in a
network that supports packet data, select
available. If you select
connection only if you start an application or function that needs it.
• To set the access point name to use your device as a modem with your
computer, select
Data call — to set the online time for the data call connection. The data call
settings affect all access points that use a GSM data call.
62
> Phone sett. > Connection
When needed, the device uses a packet data
Access point.
and from the following:
Packet data connection > When
S e t t i n g s