Threading The Needle Thread 2:12 - Pfaff expression 2026 Owner's Manual

Technical section
Threading the needle
Switch off the main switch
Raise the presser foot lifter (20). Place the thread on the
spool holder and t a spool cap of the right size.
Using both hands, pull the thread into thread guide A from
the front. Place the thread from right to left into the pre-
tension device B. Now pass it through the left threading
slot downwards. Pull the thread around the stop C in the
right threading slot and upwards to the take-up lever (19).
The thread must be pulled into the take-up lever from left
to right. Pass the thread downwards in the right-hand
threading slot. Pull the thread from the side behind one of
the two thread guides D.
To thread the needle, please refer to the next page.
A
B
C
D
2:12