Olympus XZ-2 Instruction Manual page 21

Taking pictures for a panorama
If you have installed the supplied computer software, you can use it to join pictures
together to form a panorama. g "Installing Software" (P. 74)
Rotate the mode dial to SCN.
1
Select [Panorama] and press Q.
2
Use FGHI to choose a pan direction.
3
4
Take a picture, using the guides to frame the
shot.
• Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
5
Take the remaining images, framing each shot so that the guides overlap
with the previous picture.
I S O
200
M 125 F5.6 125
• A panorama may include up to 10 images. A warning indicator (g) is displayed after
the tenth shot.
After taking the last shot, press Q to end the series.
6
#
Cautions
• During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$
Notes
• Pressing Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.
38 [ 2 ]
I S O
200
M 125 F5.6 125
[ 3 ]
Exit
2
38
Exit
EN 21