Table of Contents
Advertisement
BATTERY LIFE AND REPLACEMENT
When "
new one (CR2032).
Blinking
Appears
continuously
NOTES:
•
Do not replace the battery around 12 midnight.
Doing so may cause erroneous measurement
results.
•
The measurement results are automatically
stored in memory at the top of the hour (e.g. at
12:00 AM, 1:00 AM, 2:00 AM, ... 11:00 PM).
The measurement results from the top of the
hour until the time the battery is replaced will be
deleted for that day.
•
Set the date and time after inserting a new
battery (refer to "Setting the Personal Data,
Weekly Calories Burned Goal Tracker, Date
and Time" on page 9).
•
The measurement records stored in memory
and the settings you have made are not deleted.
•
The battery that comes with the unit is for
initial use. The battery may run out within 5
months.
26
" blinks, replace the battery with a
Battery power is low.
Battery is exhausted.
The unit stops measurement.
Data cannot be transferred.
The backlight does not light up.
Advertisement
Table of Contents
