Ignition Switch Positions - Opel Automobile Owner's Manual

132 Driving and operating

Ignition switch positions

0 = Ignition off
1 = Steering wheel lock released,
ignition off
2 = Ignition on, for diesel engine:
preheating
3 = Starting
Starting the engine
Starting engine with ignition
switch
Operate clutch and brake, automatic
transmission in P or N, do not
accelerate; for diesel engines, turn
the key to position 2 for preheating
until control indicator ! goes out;
turn key briefly to position 3 and
release key when engine is running.
Before restarting or to switch off the
engine, turn key back to 0.
Starting engine with the
Start/Stop button
The electronic key must be in the
vehicle interior. Operate clutch and
brake, automatic transmission in P or
N, do not accelerate, for diesel
engines, press the button briefly to
start preheating, move the steering
wheel slightly to release the steering
wheel lock, wait until control
indicator ! goes out and then press
button for 1 second and release when
the engine is running.
Press button again to repeat the
starting procedure or to switch off the
engine.