Philips 42PFL5008G User Manual page 57

Control devices
If you connect multiple HDMI-CEC devices
that support this setting, you can control all
such devices through the TV remote control.
Note: This is an advanced setting. Devices
that do not support this setting cannot
respond to the TV remote control.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink] > [EasyLink remote
control].
3. Select [On] or [Off], then press OK.
Tips:
•
To switch back to TV control, press
then select [Watch TV].
•
To control another device, press
then select the device from the Home
menu.
EasyLink buttons
You can control HDMI-CEC compliant
devices with these buttons on the TV
remote control:
•
: Switch the TV and the connected
device on or to standby.
•
Play buttons: Control video or music
play.
•
Numeric buttons: Select a title, chapter
or track.
•
OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.
•
: Display the TV Home menu.
Switch off connecting devices
You can also set the TV to switch off the
connecting HDMI-CEC compliant devices if
they are not the active source. The TV
switches the connecting device to standby
after 10 minutes of inactivity.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Auto switch off devices] > [On],
then press OK.
Select speaker output
If a connected device is HDMI Audio Return
Channel (HDMI ARC) compliant, you can
output TV audio through an HDMI cable.
Additional audio cables are not required.
Make sure you connect the device to the
HDMI ARC connector on the TV. See
Connect your TV > About cables > HDMI
(Page 43).
Switch on HDMI ARC
1. Press
2. Select [Setup] > [TV settings] > [Sound]
> [Advanced] > [HDMI 1 - ARC].
3. Select one of the following, then press
,
OK.
•
[On]: Hear the TV audio through the
,
connected HDMI-ARC compliant
device.
•
[Off]: Hear the TV audio through the
TV speakers, or through a device
connected through the digital audio out
connector.
Note: Make sure that all HDMI-CEC settings
are properly set up on the connected device.
Set up TV speakers
1. Press
2. Select [Setup] > [TV settings] > [Sound]
> [Advanced] > [TV speakers].
3. Select an option, then press OK:
•
[Off]: Switch off TV speakers.
•
[On]: Switch on TV speakers.
•
[EasyLink]: Switch off TV speakers, and
stream TV audio to a connected
HDMI-CEC audio device.
•
[EasyLink autostart]: When a
HDMI-CEC audio device is connected,
automatically switch off TV speakers
and stream TV audio to the device.
.
.
EN 57