Watch Connected Devices; Press Ok; Options - Philips 42PFL5008G User Manual

Smart TV keys on your keyboard
•
Enter : Confirm an entry.
•
Backspace : Go to the previous
page.
•
Navigation keys: Navigate between
fields.
•
Tab: Go to the next field.
•
Tab and Shift: Go to the previous field.
•
Home: Scroll to the top of the page.
•
End: Scroll to the bottom of the page.
•
Page Up: Scroll up the page.
•
Page Down: Scroll down the page.
•
+/-: Zoom in or out.
When the TV detects the mouse, you can
set the tracking speed.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [Pointer/mouse settings].
3. Change the mouse settings.
Use the USB mouse with your TV
•
OK: Left mouse button (left-click).
•
(Back): Right mouse button
(right-click).
•
Scroll wheel: to scroll up and down an
Internet page.
Note: The USB mouse cannot navigate in
the TV menus.

Watch connected devices

Select a device
Before you can watch a device, connect the
device to the TV. See Connect your TV >
Connect device (Page 44).
Automatically detect a device
When you connect a new HDMI device to
the TV, the device is detected automatically
and added to the Source menu.
Select a device with SOURCE
1. Press SOURCE.
2. Select a device, then press OK.
Select a device from Home menu
1. Press .
2. Select [Source], then press OK.
3. Select a device, then press OK.
Update the source list
If you add or remove a device, update the
source list.
1. Press SOURCE.
2. Press

OPTIONS.

3. Select [Scan connections], then press OK.
4. Follow the onscreen instructions.
Change device settings
Change the device type
You can change the device type
automatically assigned by the TV.
1. Press SOURCE.
2. Select the device, then press [Change
type].
3. Select a suitable device type.
4. Select [Continue], then press OK.
Rename a device
You can rename a device after it is added to
the Source menu.
1. Press SOURCE.
2. Select the device, then press [Rename].
3. Use the onscreen keypad to enter a new
name
4. When complete, select [Done], then

press OK.

EN 55