Use Philips Easylink; Change Settings; Picture - Philips BDP2100 User Manual

Use Philips EasyLink

This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
2
Press .
3
Select [Setup]> [EasyLink].
4
Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
One Touch Play
When a video disc is in the disc compartment,
press to wake up the TV from standby, and
then play a disc.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
14 EN

3 Change settings

This section helps you to change the settings of
this player.
1
2
3
Note
You cannot change a menu option that is grayed out.
To return to the previous menu, press . To exit the
menu, press .

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV Display]: Select a picture display
[HDMI Video]: Select an HDMI video
resolution.
[HDMI Deep Color]: Display colors
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
[Picture Settings]
color setting.