3Com PathBuilder S200 Series Owner's Manual page 84

Bridge Filtering
Configure NetBIOS
Name Filter Table
Configuring
NetBIOS Name
Filter Table
80
Figure 41 highlights the NetBIOS Name Filter Table selection in the Configure
Bridge menu.
Node: Address:
Menu: Configure Bridge
Bridge Parameters
Bridge Link Parameters
MAC Address Filter Table
Protocol Filter Table
NetBIOS Name Filter Table
LSS Parameters
LLC LT Station Table
LLC LT WAN Parameters
LLC LT Profile Table
#Enter Selection:
Figure 41. Configure Bridge Menu
To configure the NetBIOS Name Filter Table, follow these steps:
Step Action
Select Configure -> Configure
1
Bridge ->NetBIOS Name Filter
Table. from the CTP Main menu.
2 Complete the record by configuring
the parameters using the description
shown in the "Parameters" section
on page 81".
Date: Time:
Path: (Main.5.22)
Result
The first entry of the NetBIOS
Name Filter Table appears.
Note
You can enter up to 255 entries in
the table. Each entry can be a
wildcard pattern that matches a
class of servers used in an
organization.
Bridging