KitchenAid KERC507 Use And Care Manual page 36

Using and Caring for Your Oven
6. Choose cook setting.
• BAKE,
• CONVECTION BAKE, or
• CONVECTION ROAST
PRESS
(example
for Bake)
YOU SEE
(or 177°C oven temperature/660C
internal temperature)
7. Set temperature (optional).
Do this step if you want to set an
oven temperature other than the
one displayed.
NOTE: See a reliable cookbook or your
convection oven cookbook for oven
temperature recommendations.
PRESS YOU SEE
(example shows 375°F [191 °C]
oven temperature and 150°F
[66°C] internal temperature)
8. Start oven.
NOTES:
• If you do not choose a cook setting
and press START, the display will show
a bake setting at 350°F (177°C). If you
want to bake at 350°F (177°C), press
START to begin. If you want to cook
with another setting or at another
temperature, do Steps 6 and 7 above
and press START.
• The temperature display will show
the set oven temperature throughout
temperature probe cooking.
• After the food temperature reaches
130°F (54°C), the probe display will
show the actual food temperature at
each 5°F (3°C) increase and stop at the
set temperature. Four tones will sound
and "End" will show when food reaches
the set temperature (unless the audible
signals have been disabled). The oven
then shuts off.
• If you want to change the probe
temperature after cooking has begun,
repeat Steps 6, 5, and 8, in that order.
At Step 6, you will be prompted for a
new probe temperature. You may also
change the oven temperature at this
point by pressing BAKE again.
PRESS YOU SEE
36
(or191°C)
(example for Bake)