Base Grille - KitchenAid KBRA22KMSS Use & Care Manual

Bottom-mount refrigerator
Table of Contents

Advertisement

Available languages

Available languages

7. Slipcompression
sleeve a ndcompression
nutoncopper
tubing asshown. Insert endoftubing intooutlet endsquarely
asfarasitwill g o.Screw compression
nutonto outlet e nd
withadjustable wrench. Donotovertighten.
8. Place t hefree endofthe tubing intoabucket orsink. Turn ON
main water s upply a nd flush outtubing until w ater i sclear.
Turn OFF shutoff valve onthewater p ipe. C heck f orleaks.
Coil c opper tubing.
Connecting
t o Refrigerator
1. Remove plastic cap from water valve inlet port. Attach the
copper tube to the valve inlet using a compression
nut and
sleeve as shown. Tighten the compression
nut. Do not
overtighten. Confirm copper tubing is secure by pulling on
copper tubing.
2. Create a service loop using extreme care to avoid kinks.
Secure copper tubing to refrigerator cabinet with a "P"
clamp.
Removing
the base grille
1. Grasp the grille with both hands.
2. Pull up on the bottom and tilt it toward you.
3. Pull down to release the top of the grille.
Replacing
the base grille
1. See markings on inside of base grille for proper placement.
2. Snap the top of the grille into place first.
3. Press down and in on the bottom of the grille until it snaps
into place.
3
4
5
1. Copper Tubing
2. "P" Clamp
3. Compression
Nut
4. Compression
Sleeve
5. Water Valve Inlet Port
3. Turn on water supply to refrigerator and check for leaks.
Correct any leaks.
4. Plug in refrigerator or reconnect power.
5. Push refrigerator into opening.
Handle
Removal
(Graphics are included later in this section.)
1. Using a 3/= in. Allen wrench, loosen the 2 set screws located
on the side of each handle.
2. Pull handle straight out from the door. Make sure you keep
screws for reattaching
handles.
Freezer Drawer
Removal
(Graphics are included later in this section.
1. Open freezer drawer to full extension.
2. Remove all articles from baskets.
3. Slide top wire basket out to full extension and lift out to
remove.
4. Remove the bottom wire basket by pressing the release
button on each side and lifting the basket from the rail guides.
/
1. Release button

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kbla22kmssKbra22kmblKbra22kmwhKbra22kmbt

Table of Contents