Cycle Chart; To Cancel A Cycle - Frigidaire LFBD2409LM0B Use & Care Manual

Cycle
Heavy Wash/Pots & Pans
For pots, pans, casseroles and
dinnerware with
dried-on or baked-on soils.
Normal Wash Hi-Tempand
Sanitize
For heavier, greasy soils and for
Sanitize.
NormalWash
For regularly soiled dishes
and silverware.
Light Wash/EcoWash
For Lightly soiled and pre-rinsed
dishes and silverware.
Top Rack/Energy Saver
For lightly soiled or pre-rinsed
dishes and silverware when you
do not have a full load.
RinseOnly
For rinsing dishes that will be
washed later.
Cycle Chart
To Select Cycle
Select HEAVYWASH/POTS &
PANSand desired OPTIONS.
HI-TEMP WASH will
automatically be provided,
SANITIZEoptional.
Select NORMALWASH and
desired OPTIONS including
SANTIZE or HI-TEMP WASH
Select NORMALWASH and
desired OPTIONS. Selecting
HI-TEMP ON or SANITIZE will
result in a Longer cycle.
Select LIGHT WASH/ECO
WASH and desired OPTIONS.
Select TOP RACKor ENERGY
SAVERand desired OPTIONS.
Select RINSEONLY.
DONOT USEdetergent.
Water
(approx,)
9.1 gal.
7.6 imp. gal.
34.6 liters
8.0 gal.
6.7 imp. gal.
30.3 liters
4.1 gal.
3.4 imp. gal.
15.4 liters
4.7 gal.
3.9 imp. gal.
17.8 liters
4.6 gal.
3.8 imp. gal.
17.4 liters
2.3 gal.
2.0 imp. gal.
8.9 liters
Time*
(Hours)
2 1/4 to
2 1/2
2
1 3/4
1 1/2
1 1/2
1/4
* Includes dry time
Washes/
Rinses
4 washes
4 rinses
5 washes
2 rinses
3 washes
2 rinses
2 washes
2 rinses
2 washes
2 rinses
2 rinses
* Sanitize Option
To sanitize your dishes and glassware, select the
SANITIZE option. When selected, the light above the pad
will come on and remain on until end of cycle. The water
temperature in the final rinse will be raised to 155°F
(68°C) and will maintain that temperature for 9 minutes.
This option is available in Heavy and Normal Wash cycles.
Only these sanitization cycles have been designed to meet
NSF requirements.
The cycle time will be extended until the proper water
temperature is reached. Washing action will continue
during the water heating delay. For best results, the
incoming water temperature should be at least 120°F
(49 °C).
The sanitize criteria may not be satisfied if there is an
interruption of the cycle, power failure or if the incoming
water temperature is below 120°F (49°C).
To turn off the SANITIZE option, press the pad a second
time. The light above the pad will turn off.
* Status Indicator Lights
The WASHING light comes on at the beginning of cycle
and remains on until the end of the main wash.
Whether heated or unheated dry is selected the DRYING
light will come on during the drying portion of the cycle.
When the SANITIZE option is selected, the SANITIZED light
will glow when the SANITIZE cycle is finished. If the
dishwasher did not properly sanitize the dishes, the light
will not come on. This can happen if the cycle is
interrupted. The light will remain on until the door is
opened.
The CLEAN light will come on at end of cycle and remain
on until door is opened.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the next
desired cycle.