Setting Cooktop Controls - Electrolux CEI30EF5GSF Use & Care Manual

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Setting Surface Controls
Setting the Perfect-SetTM
cooktop
The cooktop controls provide 5 digital display
windows to help set power levels for the cooking
zones located on the cooktop. These settings work
the same way as traditional knob settings except
the settings are made using a touch sensitive panel
and show settings using LED style displays.
Available cooktop settings
Your cooktop control provides 15 different power
level settings for each of the 5 cooking or heating
zones (including the warming zone). These displays
have keypads that allow the user to first activate
(ON/OFF) the needed element and then to quickly
turn that element ON using 3 preset power levels
(Io, reed or hi). - See Figs. 4 through 6 -
In addition to the automatic settings, the + and -
keypads allows for more precise level adjustments
between the automatic settings.
Element size indicators
Two of the cooktop element positions display
additional red keypads -Fig. 2 - that allows the user
to switch between single or dual elements sizes
quickly whenever the cooking zone is active.
• 1 circle = inner element only
• 2 circles = inner and outer elements combined
Hot Surface Alert
After using any of the radiant element positions the
ceramic cooktop will become very hot. Even after
turning the surface controls off, the cooktop will
remain hot for some time after use.
Thecooktop control monitors thetemperature of
the cooktop surface and displays the message
hot surface when the cooktop is still too hot to
touch -Fig. 1. If the hot surface message remains
displayed, the heating zone may be set again and
used for cooking.
Fig. 2
active set for low
Fig. 3 Fig. 4
set for medium set for high
Fig. 5 Fig. 6
Fig. 1