Multi Stage - Electrolux EW30DS65GB5 Use & Care Manual

Cooking
odes
MULT)STAGE
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
This feature enables you to perform sequential cooking at the touch of a button. Its purpose is
to program a queue of up to three cooking modes with individual cooking time and temperatures
in a sequence. This feature can be used with most cooking modes; Baking, Broiling, Convection
Baking, Convection Roasting, Convection Broiling, Keep Warm and Bread Proof. A Cook
Time can be programmed with your cooking mode and then queued. An auto-suggested set
temperature outputs in the display as a default value during the set temperature programming.
Any stage programmed with Broil or Convection Broil cannot last longer than 10 minutes. A
proper cook time and a set temperature are required for every stage programming. At least
two stages must be programmed before a Multi-Stage cooking operation starts. During stage
1 cooking the electronic control provides temperature visual output in the display. During stage
2 and 3, the electronic control displays the set temperature only.
To set a Multi Stage sequence
(Timed Convection Bake, Timed Broil, Keep Warm):
1. Arrange interior oven racks and place food.
UPPER
2. Select oven by pressing UPPER OVEN OVEN.
3. Press MULTi STAGE _z.
.
Stage 1
Press CONVECTION BAKE _. "350" will flash in the display prompting to enter a
temperature.
5. Enter a temperature using the numeric pads _0_ to _9_.
6. Press START <_. "00:00" will start flashing in the display prompting to enter a cook
time.
7. Enter a cook time using the numeric pads _0_ to _.
8. Press START <_. The Multi-Stage indicator will now display the 2nd stage.
.
Stage 2
Press BROIL F'_ "550" will start flashing in the display prompting to enter a
temperature.
10. Enter a temperature using the numeric pads _0_ to (_.
11. Press START <_. "00:00" will start flashing in the display prompting to enter a cook
12.
13.
time.
Enter a cook time using the numeric pads _0_ to _.
Press START 4_. The Multi-Stage indicator will now display the 3rd stage. If a third stage
is not needed, press START <_ a second time. This will start the cooking sequence.
Read next page for stage 3 and cancefing details