Advertisement
ALLOWING
COOLING
TiME BEFORE
USE
To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least 8 to 12 hours before placing food inside.
During this cooling period, you do not need to adjust the controls, which are preset at the factory.
SETTING
COOLING
TEMPERATURES
Your refrigerator comes with a state-of-the-art
electronic digital control system. The system's control panel is located at the top of the
fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures
of your freezer and fresh
food compartments. The models with a 2-digit temperature display are for reference only, and do not display the current accurate
compartment temperature.
Should you desire to see what the current accurate temperature is, place a separate thermometer
inside the
freezer or fresh food compartment
in the desired location.
9 is _oldest
, allow 24 h_s for adj_stme_ts
(Single
Digit Display : Features may Vary)
The advanced electronic control system in your refrigerator includes additional display modes that service professionals can use to
rapidly diagnose performance issues:
To adjust the temperature to a higher or lower setting, press the Up
(Cold) or Down (Colder) button closest to the display. The first time
you press the button, the display shows current setting you entered.
Each press of the button after that changes the setting by one.
The display shows your new setting momentarily, and then changes
back to the current temperature.
Advertisement
