Table of Contents
Advertisement
REMOVAL
OF PACKAGING
TAPE:
To remove adhesive left from packing tape and ensure you do not damage the finish of your new appliance, use an
application of household liquid dish washing detergent, mineral o11, o r cooking o11. Apply wlth soft cloth and allow
to soak. Wipe with soft cloth. DO NOT use plastic pad or equivalent. Wipe dry and then apply an appliance polish
to thoroughly clean and protect the surface. This procedure Is also safe for the face of microwave doors and other
plastic parts.
NOTE:
The plastic
tape must be removed
from chromo
trim on range parts.
It CANNOT
be removed
if baked on.
TO START
THINGS
COOKING
COOKTOP
COOKING
Beforeyou usethecooktop for the first Ume,cleanlt
with
cooktop cleaner.
This will leave a protective coating.
The cooking zones are shown by the outlines on the
glass surface of the cooktop.
COOKING
ZONES
The sign near each cooktop control knob shows which
element Is turned on by that knob.
O
OFF
O
OFF
O
OFF
O
OFF
leo
+o
¥E0
eo
oo
oe
oo
O0
eo
oo
oe
Left
Left
Right
Right
Rear
Front
Rear
Front
To operate
cooktop
controls:
1. Push to turn.
2. Set on or between
marks for desired
heat.
COOKTOP
GUIDE
TO BASIC
SETTINGS
'=HI"
Used for quick starts, such as
bringing water to a boil.
"MED-HI"
Used for frying and rapid boiling.
+@
•
_
OFF I//
.s
•
MEO
"MED"
Used for slow boll and sautdlng.
"MED-LO"
Used for cooking foods In small
amounts of water.
"LO"
Used for steaming foods or keep
Ing foods at serving temperature.
MEg
o OF__,
-0-
•
lIED
•
.Q
MED
When a cooking zone surface Is turned on, coils beneath
the zone radiate heat through the glass to the utensil.
The red glow of the colts will be visible through the
glass.
It will take the cooking zone surface a few
•moments to heat up.
The coil cycles on and off to
maintain your selected control setting.
See the Cleaning
Tips for important
information
about
maintaining
your cooktop.
The Indicator light will glow when any cooking zone Is
turned on.
7
NEMTC60
Advertisement
Table of Contents
