Oven Control Functions; Setting Oven Controls - Kenmore 790.9231 Series Use & Care Manual

Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various functions of the oven as described below.
BAKE PAD--Used to
select the bake
function.
BROIL PAD-- Used
to
broil function.
UP and DOWN ARROW
PADS-- Used along with the
function pads to select oven
temperature, time of day, clean
time and minute timer.
J
TIMER ON/OFF PAD-- Used to set
or cancel the minute timer. The
minute timer does not start or stop
cooking.
Setting Oven Controls
CLOCK SET PAD--
Used to set the time of
day.
OFF/CANCEL -- Used to clear any
function previously entered except the
time of day and minute timer. Press
OFF/CANCEL to stop cooking.
To Set the Clock
When the range isfirst plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1. Press _.
2. Within 5 seconds, press and hold the A mr v until the correct time of day appears in the display.
To Set the Minute Timer
1. Press
2. Pressthe A to increase the time in one minute increments. Press and hold the A. to increase the time in l0 minute
increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the v first, the timer will advance to 11 hours and 59 minutes.
3. The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.
4. When the set time has run out, the timer wilt sound a 3 second beep. 0:00 will appear in the display until is pressed.
Note: While the minute timer is counting down, the ":" will flash. The minute timer does not start or stop cooking. It serves as
an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any
of the other oven functions. When the minute timer is in use with any other function, the minute timerwill be shown in the display.
To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the _ or v to increase or decrease the time.
To Cancel the Minute Timer before the set time has run nut: Press
9