Frigidaire FRA08EZT10 Use & Care Manual page 5

Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETrlNG;
tamp/timer
auto
mad
lo
DO THIS:
PRESS A TO
RAISE
PRESS V TO
LOWER
YOU WILL SEE:
temp/timer
auto
hi []
reed
to
Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will
be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode. The temperature will be auto-
matically maintained anywhere between 55 °F (13 °C) and 80 °F (27 °C) for heating mode. If you want the display to read the
actual room temperature. See "To Operate on Fan Only" section on Page 6.
TO AD3UST FAN SPEEDS;
tamp/timer
auto
hi []
med
to
DO THIS:
PRESS TO
SELECT
YOU WILL SEE;
temp/timer
auto
hi
med
tom
TO USE AUTO FAN FEATI
temp/timer
iRE;
auto
DO THIS;
PRESS FAN
BUTTON
SELECT AUTO
YOU WILL SEE;
temp/timer
aura []
hi
reed
to
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto-
matically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set
temperature. Press either the fan slower or fan faster button to adjust the fan speed manually. This function is deactivated in the
heating mode on 115V models.
@2009 Electrolux Home Products, Inc. All rights reserved.