Frigidaire FGES3045KFE Use & Care Manual page 34

SETTING OVEN CONTROLS
SETTING SELF-CLEAN CYCLE TIHE LENGTH
The SELF CLEAN pad controls the Self-Cleaning feature. Tf
you are planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down
and the oven door to unlock. This normally takes about one
hour. So a 3 hour self-clean cycle will actually take about 4
hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light
soils, a 3 hour cycle for average soils, and a 4 hour cycle
for heavy soils (to assure satisfactory results).
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. "CLn" and "3:00" HR will show
in the display. The control will automatically clean for
a 3 hour period (default self-cleaning cycle time).
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
.
,
Press START. "door Loc" will appear, a beep will sound
and the "DOOR" and I_I icon will flash; the letters"CLn"
will remain on in the display.
As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the "DOOR" indicator light and
icon will stop flashing and remain on. Also, the oven
icon will appear in the display.
NOTE
Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed
i. "HOT" will appear in the display. The time of day, the
DOOR" and I_ icon will remain in the display.
2. Once the oven has cooled down for approximately I
HOUR, "door OPn" will appear and the "DOOR" and
I_I icon will flash until the door is unlocked, the oven
door can then be opened and the timer will revert back
to the time of the day.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. PressCANCEL.
2. The oven door can onlybe opened after the oven has
cooleddown forapproximately i HOUR, "door OPn"
will a ppear and the"DOOR" and I_I iconwill f lash until
thedoor is unlocked, t heoven door canthen be opened
and thetimerwill revert back to thetime ofthe day.
The SELF CLEAN and DELAY START pads controls the
Delayed Self-Clean operation. The automatic timer will turn
the oven on and off at the time you select in advance.
To set the control for the Self-Cleaning Cycle to
start at a delayed time and shut off automatically
(example: 3 hour self-dean cycle to start at 4:30)
1. Be sure the clock isset with the correct time of day and
the oven door is closed.
2. Press SELF CLEAN. "CLn" and "3:00" HR will show
in the display. The control will automatically clean for
a 3 hour period.
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
3. Press START. "door Loc" will appear, a beep will sound
and the "DOOR" and I_i icon will flash; the letters "CLn"
will appear in the display as soon as the door is locked.
4. As soon asthe control is set, the motor driven oven door
lockwill begin to close automatically. Once the door has
been locked the "DOOR" and _ icon indicator light will
quit flashing and remain on.
5. Press DELAY START. Enterthedesired starttime using
the number pads 4 30.
6. Press START. "DELAY", "DOOR" and I_I icon icons
will remain on.
7. The control will start the self-cleaning at the set start
time, for the period of time previously selected. At that
time, the icon "DELAY" will go out; "CLn" and oven
icon will appear in the display.
When the Self-Clean Cycle is Completed
1. "HOT" will appear in the display. The time of day, the
"DOOR" and I_ icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, "door OPn" will appear and the "DOOR" and
I_I icon will flash until the door is unlocked, the oven
door can then be opened and the timer will revert back
to the time of the day.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. PressCANCEL.
2. The oven door can only be opened after the oven has
cooleddown forapproximately 1 HOUR, "door OPn"
will appear and the "DOOR" and I_I icon will flash until
the door isunlocked, the oven door can then be opened
and the timer will revert back to the time of the day.
NOTE
Models B & C only, during self-clean cycle surface
elements can not be used (see ESEC Lockout Feature)
34