m
Clean lint screen after every load
Wash lint screen occasionally_
Inside the Dryer
•
Clean the dryer lint screen after every load. Lint build4_p in the screen restricts
air flow, which causes longer drying times. The screen is located at the bottom
of the door opening. Remove by pulling straight u p. Remove the lint and replace
the screen.
•
Occasionally a waxy build-up may form on the lint screen from using dryer-added
fabric softener sheets. To remove this build-up, wash the lint screen in warm,
soapy water. Dry thoroughly and replace. Do not operate the dryer without the
lint screen in place.
•
Ifthe dryer drum becomes stained from noncolorfast fabrics, clean thedrum with
a damp cloth and a mild liquid household cleanser. Remove cleanser residue
before drying the next load.
•
Every 18 months an authorized servicer should clean the dryer cabinet interior
and exhaust duct. These areas can collect lint and dust over time. An excessive
amount of lint build-up could result in inefficient drying and possible fire hazard.
Outside
•
When laundering is completed, wipe cabinet with a damp cloth. Turn water
faucets off to prevent pressure build-up in the hoses.
Clean the cabinet with mild soap and water. Never use harsh, gritty
or
abrasive cleansers, If the cabinet becomes stained, (:lean with diluted chlorine
bleach [I/2 cup (120 ml) in 1 quart ¢95 L) water]. Rinseseveral times with clear
water.
Remove glue residue from tape or labels with a mixture of warm water and mild
detergent. Or, touch residue with the sticky side of the tape or label.
Before moving d_e laundry center, place a strip of cardboard orthin fiberboard
under the front leveling legs to prevent floor damage.
12