Quick Preh Eat - Frigidaire FGEF302TNFA Use & Care Manual

QUICK PREH EAT
Use the quick preheat feature when using single rack
baking to quickly heat the oven to bake temperatures.
Use this feature only for standard baking. A reminder
tone will sound indicating when to place the food in the
oven.
When the oven is finished preheating quick preheat will
become just like the bake feature and continue to bake
until CLEARled.
To set the quick preheat with an oven temperature
of 375°F
1. Arrange the interior oven racks.
2. Press UPPER or LOWER to select oven.
3. Press QUICK PREHEAT. "350" will appear in the
display. :If a preheat of 350°F is needed, press START.
4. Press 3 7 5.
5. Press START. "PREHEAT+" will be displayed while the
oven is preheating.
SETTING BAKE
The BAKE pad controls normal baking. If a rapid
preheating is preferred, refer to the QUICK PREHEAT
feature for instructions. The oven can be programmed to
bake at any temperature from 170°F to 550°R
Baking Tips:
* Preheat your oven before using the bake mode.
* During preheat, the bake and broil elements are used
in cycle to quickly heat the oven.
* Use only one rack and center the pans as much as
possible on rack 2 or 3.
* If using two racks, place the oven racks in positions 1
and 3.
* Allow 2" to 4" (5,1 to 10,2cm) around the utensil(s)
for proper air circulation.
* Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature to 375°F
1. Arrange the interior oven racks.
2. Press UPPER OVEN or LOWER OVEN to select oven.
3. Press BAKE, "350" will appear in the display. If a
bake of 350°F is needed, press START.
4. Press 3 7 5.
5. Press START. The actual temperature will be
displayed. A beep will sound once the oven
temperature reaches 375°F and the display will show
,375 o..
6. Place food in the oven.
Pressing CLEAR will stop the feature at any time.
To change the Bake Temperature (example:
changing from 375°F to 425°F)
1. Press UPPER OVEN or LOWER OVEN to select oven.
2. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to
425°F, press BAKE and "375" will appear in the
display.
3. Press 4 2 5. "'BAKE"' will continue to flash and
"425 °" will appear in the display.
4. Press START. The actual temperature will be
displayed.
During the first rise of temperature, the Bake and Broil
elements will also cycle for a better heat distribution.
ii