Advertisement
Available languages
Available languages
Mulcher plug
SIDE DISCHARGING
• Mulcher
plug must be installed
into rear
discharge
opening
of mower.
• Open mulcher
door and install dis-
charge
deflector
under door as shown.
• Mower
is now ready for discharging
operation.
• To convert
to mulching
or bagging
operation,
discharge
deflector
must be
removed
and mulcher
door closed.
SIMPLE
STEPS
TO REMEMBER
WHEN
CONVERTING
YOUR
LAWN MOWER
FOR MULCHING
-
1.
Rear mulcher
plug installed.
2.
Mulcher
door closed.
FOR REAR BAGGING
-
1.
Rear mulcher
plug removed.
2.
Grass
catcher
installed.
3.
Mulcher
door closed.
FOR SIDE DISCHARGING
-
1.
Rear mulcher
plug installed.
2.
Discharge
deflector
installed.
,_CAUTION:
Do not run your lawn
mower without
mulcher
plug or approved
grass catcher
in place.
Never attempt
to
operate
the lawn mower with the rear door
removed
or propped
open.
Discharge deflector
\
TO EMPTY
GRASS
CATCHER
1. Lift up on grass catcher
using the
frame
handle.
2.
Remove
grass catcher
with clippings
from under lawn mower
handle.
3.
Empty
clippings
from bag.
NOTE:
Do not drag the bag when empty-
ing;
it will cause unnecessary
wear.
\
Grass
catcher
- -_
frame
\
\
Open mulcher door
BEFORE
STARTING
ENGINE
ADD OIL
Your lawnmower
is shipped
without
oil in
the engine.
For type and grade of oil to
use, see "ENGINE"
in the Maintenance
section
of this manual.
A
CAUTION:
DO NOT overfill engine
with
oil, or it will smoke
heavily from the muffler
on startup.
1. Be sure lawnmower
is level.
2.
Remove
oil dipstick
from oil fill spout.
3.
You receive
a container
of oil with the
unit.
Slowly pour the entire container
down the oil fill spout into the engine.
Advertisement
