Timer Features; Sleep Timer - Hitachi 27CX28B Operating Manual

Channel I.D.
This feature allows you to enter the call names of up to 30
stations into memory (using up to 4 characters for each
station). The I.D. name will then display along with the
channel number when changing channels or pressing
RECALL.
Channel I.D.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60, or 90
minutes. Display will flash 3, 2, and I to indicate the last three
remaining minutes prior to turn off. The Recall display will
also appear.
NOTE: This feature will be disabled when Auto Power
On is activated.
MENU
1. Press O.
2. Press CURSOR A or • and4 or •tohighlightthe
Timer Icon.
3. Press _ to display the Timer Control Menu.
.
2.
.
MENU
Press O.
Press CURSOR • or • and 4 or • to highlight the
Channel I.D. Icon.
MENU
Press _ to display the Channel I.D. Menu.
4. Press CURSOR • to select NO, 30, 60, or 90 minutes
(Sleep Timer will be activated).
5. Press _ twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through
4. In step 4 select "NO" instead of minutes.
4. Press CURSOR • or •, or use the Remote Control
Keypad to enter the channel number you wish to assign
a Channel Identifier.
5. Press CURSOR • to highlight ENTER I.D.
6. Press CURSOR • or • to select first character in
Channel Identifier.Then press cursor • to move cursor
to the second position and repeat until the complete
Channel Identifier is entered (up to 4 characters).
7. Press CURSOR • or • to highlight CHANNEL
NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Identifier(s).
8. Press
twice to exit menus.
NOTE: To delete a Channel I.D. (Station Identifier) from
memory all four.character positions in the "ENTER
I.D." area must display a dash mark (-).
position.
Press the RECALL button to display the remaining
minutes for Sleep Timer, the statuswill display in the
bottom left corner.
-18-