Hitachi 50FX19K Operating Manual page 16

Hide thumbs Also See for 50FX19K:
Table of Contents

Advertisement

HOW TO USE THE GENIUS
REMOTE
TO CONTROL
YOUR TV
_)PIP
CH button
Use the PIP CH button to select between main picture and sub-picture tuning. An arrow next to the channel num-
ber will indicate which channel is being controlled.
(_
MENU, CURSOR buttons
All the On-Screen Display features can be set or adjusted by usingthese buttons.
The "MENU" button will start the On-Screen Display.
The "CURSOR" buttons will highlight functions or adjust and set different features.
(_) CHANNEL SELECTOR buttons
"CHANNEL SELECTOR" buttons are used to set Family Favorites, Channel Memory, etc..
Enter two or three numbers to select channels. Enter "0" first for channels 1 to 9. For channels 100 and above,
press the 1 button, wait until another dash appears next to the channel display on your TV, then enter the remain-
ing two numbers using the number buttons.
Channel selection may also be performed by pressing CH up (A) or down (V).
You may also use these buttons for QUICK LIST. Press and hold the CH up (A) or down (V) button and a win-
dow will appear, allowing you to choose the channel you wish to tune. Release the CH (A) or (V) button when
the channel you wish to tune is highlighted, and the TV will tune to that channel.
I NOTE:
I
The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (See
I
page 29.)
I
(_
INPUT button
The INPUT button will select between both antenna signals and the two sets of video input jacks each time the
button is pressed. If the Picture-in-Picture is on, the INPUT button will select between the two sets of video input
jacks and both antenna sources when main channel is chosen with the PIP CH button. If the sub-picture is cho-
sen, the INPUT button will select between the two sets of video input jacks and the ANT A antenna source (ANT
B source cannot be displayed as a PIP Sub-Picture.)
I NOTE:
I
When ANT A is selected, the channel number in the upper right corner of the screen is in green. When
I
ANT B is selected, the channel number is in yellow.
I
T
INPUT
l
VIDEO1
(S-IN)
16
INPUT
_1
_1_
VIDEO2
_NPU3-

Advertisement

Table of Contents
loading

This manual is also suitable for:

55fx20b50fx18b

Table of Contents