Table of Contents
Advertisement
PICTURE-IN-PICTURE
(PIP)
(_) FREEZE (FRZ) button 0Nith PIP ON)
If you wish to freeze the sub-picture, press the FRZ button. This is convenient when trying to write down the address for a mail
order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FRZ button again.
I
NOTE:
The FREEZE function will only operate when SINGLE PIP mode is chosen.
(_
FREEZE (FRZ) button 0NIth PIP OFF)
Press the FRZ button to freeze one or four frames of the picture, depending on the mode previously selected (SINGLE or STROBE).
To change FREEZE modes, use cursor • or • to select which type of FREEZE mode you wish to view. The new selection will
appear the next time the FREEZE function is used.
SINGLE FREEZE
Press the FRZ button to freeze one frame of the picture you are currently'viewing. Press this button again or PiP to return to normal
viewing.
FRZ
FRZ
STROBE FREEZE
Press the FRZ button to freeze four frames of the picture you are currently viewing.
Press this button again or PIP to return to
normal viewing. This feature is useful for viewing a moving picture that has many details, for example, a close play in a sporting
event or goff swing.
FRZ
FRZ
I
] _AUTION:
A pattern bum may develop if the sub-picture is left in the same comer permanently.
If the PIP feature is used I
frequently, occasionally MOVE the sub-picture to a different corner. You may also vary its position using the I
CURSOR ,4, I_, &, or • buttons.
I
NOTE:
1. Only sound from the main picture can be heard.
2. Each freeze frame is delayed about 0.1 (1/10) second.
3. The FREEZE function will display blank sub-pictures when the COMPONENT: Y-CBC R Input 2 source is set as main
channel.
24
Advertisement
Table of Contents
