Haier HI1MK Installation Instructions Manual page 5

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
8,
Insert the supplied fill tube completely into the grommet. Reinstall the
grommet with the filling tube through the refrigerator body. (Rotate
while inserting the tube) Firmly reinstall the grommet in the rear of the
refrigerator. (See fig # 3)
(Figure 3)
g,
Install the supplied leveling bracket with the supplied leveling bracket
screw to the screw hole on the bottom of the icemaker. Use the screw
hole that is near the power cord. (See fig. # 4)
Note: Do not tighten all the way
(Figure 4)
10. Take the 2 pan head screws and screw them half way into the 2 holes
on the left wall of the freezer compartment.
1 1. Insert the electrical power cord plug of the icemaker into the power
socket on the rear wall of the freezer compartment. (See fig. # 5)
(Figure 5)
i