Controlsettings - Hotpoint HDA100 Owner's Manual

ControlSettings
....... Cycles
POTS & PANS/ Forheavilysoiled dishes or cookwarewith dried on
HEAVYWASH or bakedon soils. Everydaydishesmay be included,
This cyclewill not removeburnedon foods,
NORMAL WASH Forloadsof everydaydishes, glassesandcookware
with mediumsoils, NOTE:Many dishes have lighter
soil than normal.Ct/oosinga cycle other than
NORMAL WASH will saveenergyandwater.
LIGHTWASH/ Fordishes with light soils.
WATERSAVER
RINSE& HOLD Forrinsingpartial loadsthat will be washed later,
Do not use detergent
PLATEWARMER Forwarming cleandislles and servingplates.This
cyclewill take approximately32 minutes.
Make sure the Dial is at the OFFposition.
1Jatch the door.
Energy Options
WASH TEMP Providesextra heatfor best performance,it is used
BOOSTON/ best wkh heavily soiled dishes,
HEATEDWASH
WASH TEMP
TurnsTEMPBOOST off,
BOOSTOFF
HEATEDDRY/ Turnsthe drying he_teron for fast drying,This cycle
HEATEDDRYON will extendthe time to yourwashcycle,
HEATEDDRY Shutsoff the dryingheat option. Dishesair dry
OFF naturallyandenergyis saved.
ENERGY SAVER Turnsall Optionsoff,
Start
Slowly turn the Dial to the STARTer 0Nposition. Don't
turn it past the stARter ONposition, or you could
accidentally miss a rinse. There is a time delay between
start-up and water till so you will not hear an v wash
action right away.
9