Reversing The Door Swing - Hotpoint HTS16BBSALCC Owner's Manual And Installation Instructions

Installation Instructions
B REVERSING THE DOOR SWING
(CONT.)
[] REMOVE THE FREEZER DOOR
(CONT.)
2.6 Transter the 2 screws from the opposite side of
the cabinet to the screw holes xacated bx the
top hinge remoxal.
[] REMOVE THE FRESH FOOD DOOR
3.1 Tape the door shut with maskino, _ tape.
[] REMOVE THE FRESH FOOD
DOOR (CONT.)
3.4 Set the door outside-up
on a non-scratching
SIIIS[il ce.
3.5 Transfer the two screws fl'om the opposite side of
the cabinet to the screw holes xacated by the center
hin(_e i'eillox¢ll.
/
J
3.2 Using a 5/16" hex-head socket screwdriver and
a 5/16" open-end wrench, remove the two
screws holding the center hinge (and the shim
glued to it) to the cabinet. I,ift the center hinge
to ti'ee its pin from the socket in the top of the
doo_; and set hinge and screws aside. Be careful
not to lose the center hinge spacer and washer.
3.3 Remove the tape and tilt the door away fl'om the
cabinet. I,ift the door fl'om the pin in the bottom
hinge bracket. (If the plastic washer sticks to the
door bottom, put it back on the hinge.)
3.6 Transfer the washer (if)our model has one) to the
opposite side.
3.7 Take one (ff the scre_vs removed in step 9 and start
it in the outeHnost screw hole on the opposite side.
Do not drive it all the _;_y down--leave enough
space under the screw head tot thickness of shim
and bracket.
I/
18