Hoover SteamVac F6026910 Owner's Manual page 5

Press cordinto cordcliponback of
handle. Pull c ord tight a nd wrap cord
around h ooks ( A2).
A1 _
Storing hose & tools
Store hose on holder by first positioning
hose in front section of holder.
Position hose on hose hook (AI).
Slide crevice tool (G) into holder (some
models only).
Position stair/upholstery nozzle in holder
at base of cleaner and snap it into place
as shown at arrow.
insert end of bare floor attachment into
holder and snap into clip as shown.
jF
While stretching hose, continue wrap-
ping it as shown. Snap end of hose con-
nector (F) into holder.
If hose connector does not reach holder,
stretch hose more thoughout the
wrapped part.
Powered hand tool
The powered hand tool is shipped in a
plastic bag for protection. Remove the
bag before using the tool by first open-
ing tool door.
To remove powered hand tool (H), pu[[ it
down and outward.
To reposition the tool, reverse this proce-
dure.
To remove the scrub module (I), grasp it
at the sides and pull it forward.
To reposition module, fit tabs in the stor-
age area into holes on back of module.
Push module to snap it securely into
position.
How to reattach tool
cover
Time tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
holes on sides of tool storage area.