Table of Contents
Advertisement
PLAYBACK
i
PLAY
button--
_°_
REWIND
button
_,_
PAUSE
button_
_
STOP
button
_J
_
F.F_NO
button
--TRACKING
buttons
--F.ADV
button
1. Insert the cassette.
VCR power is turned on automatically.
2. Turn the TV on and select the video channel.
3. Press the PLAY button.
4. Press the STOP button to stop playback.
Auto Tracking
When playback is started, the auto tracking func-
tion operates and adjusts tracking automatically so
the picture is optimized.
•
Auto tracking may not operate correctly when
the tape is scratched or the recorded condition
is poor. In this case, press the tracking control
button (V or k)to
adjust tracking.
•
After operating the tracking manually, eject the
cassette to operate auto tracking feature.
Still playback
When the PAUSE button is pressed during play-
back, a still picture can be seen. To start again
press PAUSE I_Jtton and the VCR will continue
playback.
Notes: •
•
There will be some noise (interference) in the
still pictures.
•
When the still mode continues for about more
than 5 minutes, the VCR will automatically
change to stop mode to protect the tape.
•
If vertical jitter (shaking) occurs during the still
mode, press either TRACKING control button
(A or V) (one by one) to minimize it.
Frame Advance
VVhen you press F.ADV
button during Still
(play.pause) mode, one frame at a time can be
seen.
Visual search
This allows you to view the picture from a record*
ed tape at high speed in both the forward and
reverse directions.
Press the PLAY button to play a tape, then press
either REW or F.FWD button.
Pictures can be
viewed at high speed in either the forward or
reverse direction.
Press the button again (or press PLAY) to return
to normal playback.
Note: The playback picture will have some noise
in the visual search mode.
Slow playback
When you press SLOW button during playback,
the tape will be played back at a speed about 5 to
30 times slower than the normal speed,
Press PLAY button to return to normal playback
mode or press STOP
button to
stop tape
movement.
Notes:
•
During slow playback TRACKING button (•
or •) can be adjusted to minimize noise bands,
•
During slow playback the slow speed can be
adjusted by operating the SLOW SPEED but-
ton (-- or + ). If you press the (-)
button, the
speed gets slower, and if you press the ( + )
button, the*speed gets faster.
• When the slow mode continues for more than
about 5 minutes, the VCR will automatically
change to stop mode to protect the tape.
When you play prerecorded tapes, the mode
indication may not appear correctly, but this
does not indicate a fault,
I
Automatic
rewind
The tape will stop and automatically rewind when
the end of the tape is reached.
This function does not operate dudng timer record-
ing and instant recording.
Rewind shut off
If power button is pressed during rewind opera-
tion, power will be turned off automatically after
the tape has been completely rewound.
E27
Advertisement
Table of Contents
