Table of Contents
Advertisement
SERVICE INFORMATION
Timer recording is not possible.
Clock is not set to correct time.
Timer has been programmed
incorrectly.
VCR is on.
TIMER SET does not appear after
programming timer.
Set clock to correct time.
Reprogran: Timer.
Turn VCR off to activate Timer.
Reprogranl Timer.
Tuning Problems
Some channels are skipped over when
Those channels are preset to be skipped.
Restore channels to chant.tel search
scanning channels,
sequence; _;elect ADD next to channel
number.
Channel cannot be switched.
VCR is in Timer Recording mode.
Press POWER to release VCR from
Timer Recording mode.
Picture and sound are weak or missing.
Antenna or cables are loose.
Tighten colanections or replace cable.
Audio-Stereo
Record/Playback
Problems
Stereo is not present
from VCR output.
TV is not Stereo.
VCR not connected
to
TV Audio/Video
Input jacks.
VCR Audio Record
Mode was not set to
Stereo.
Tape recorded
with 2nd Audio or
Monaural
sr_ecified as VCR Audio
Record
Mode.
7:::
VCR Audio/Video Output jacks not
connected to TV Audio/Video input
jacks.
Connect VCR to TV Audio/Video
In (or
Hi-Fi Stereo Audio In jacks.)
Set to appropriate Audio Record mode.
Connect VCR Audio/Video Out to TV
Audio/Video In.
VCR records program on different
channel than channel specified.
Recorded wTong channel or no channel
with Cable Box.
VCR Plus Problems
Channel Map Procedure is incorrect or
was not performed.
Cable Box not tuned to channel you
wished to record.
Cable Box not turned on.
VCR not tuned to Cable Box Output
Channel; 2, 3, 4, 5, 6, 7, 8 or 9.
No program on cable system.
Cable system not operating.
Channel
Map for your local bJroadcast
area.
Tune Ca'bl_: Box to channel you wish to
record.
Turn
Cable Box on and leave on.
Tune VCR to Cable Box Output
Channel
number.
Call cable comp_Lny tbr number
if necessary.
Call cable company
for infornmtion.
:_61-o
14 -- 2
Advertisement
Table of Contents
