GE Profile WPDH8850 Owner's Manual & Installation Instructions page 16

Installation
I str cti
Washer
WPDH8850, WPDH8910, WPDH8900
If gou have ang questions, coil 800.GE.CARES (800.432.2737)
or visit our Website at:
GEAppliances.com
In Canada, coil J.800.56J.3344 or visitwww.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Save these instructions
for local inspector's use.
• IMPORTANT - Observe a,,
g overning
codes and ordinances.
• Note to Installer
- Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep
these instructions
for future reference.
• Skill level - Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time - 1-3 hours
• Proper installation is the responsibilitg of the installer.
• Product failure due to improper installation is not
covered under the Warrantg.
FOR YOUR SAFETY:
-AWARNING
• This appliance must be properlg grounded and
installed as described in these Installation Instructions.
Do not install or
store
appliance in an area where
it will be exposed to water/weather. See Location
of Your Washer section.
• NOTE:This appliance must be properlg
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
TOOLS REQUIRED FOR
WASHER INSTALLATION
rj 1/4" nut driver
rj 3/8" socket with ratchet
rj ]/8" open-end wrench
rj Adjustable wrench or 7/16" socket with ratchet
rj Adjustable wrench or 9/16" open-end wrench
rj Channel-lock adjustable pliers
rj Carpenter's level
PARTS SUPPLIED
@
rj Water Hoses (2)
rj Cable Tie
rj Hose Guide
16