Table of Contents
Advertisement
3. Using the EVBot
After the EVBot Greeting screen, press OK to enter main menu:
To Make sure EVBot controlling does not conflict with the BIOS, only start adjustments after the system is fully
booted up.
Now, you can choose the device you wish to control first. If any of the devices in the list are not engaged, just ignore it
and scroll to the device you have connected. Let's go into Motherboard Control first. Press OK on 'Motherboard'.
You will see Voltages, Clocks, Opt Booster. Let's click OK to enter the Voltages Menu.
Advertisement
Table of Contents
