Installation - GE DPSQ475ET Owner's Manual

To reduce the r!sk of fire i electric shock, or inju_ to persons
when ush_g your appli_ce; follow basic precautions; including
4
Use this appliance only for its
intended purpose as described
in this Owner's Manual.
This dryer must be properly
installed and located in
accordance with the Installation
Instructions befi)re it is used.
If you did not receive an
Installation Instructions sheet
with your dryer, you can obtain
one by calling, toll-free, in the
United States the GE Answer
Center ®, 800.626.2000. In
Canada call, toll-free,
800-361-3400.
Properly ground to conform
with all governing codes and
ordinances. Follow details in
Installation Instructions.
-- Install or store where the tempera-
ture is above 50°F. (10°C.). Do
not install tire dryer where it will
be exposed to tire weather.
- Connect to a properly rated,
protected and sized power supply
circuit to avoid electrical overload.
Gas dryers MUST be exhausted
to the outside. Careflflly follow
the Exhausting details in the
Installation Instructions.
Exhausting electric dryers to
the outside is STRONGLY
RECOMMENDED to prevent
large amounts of moisture and
lint from being blown into the
room. Carefiflly follow the
Exhausting details in the
Installation Instructions.
• Do not repair or replace
any part of the appliance or
attempt any servicing unless
specifically recommended in this
Owner's Manual or in
published
user-repair instructions that you
understand and have the skills
to carry out.
• When disconnecting this
appliance pull by the plug rather
than the cord to avoid damage to
the cord or junction of cord and
plug. Make sure that the cord
is located so that it will not be
stepped on, tripped over or
otherwise subjected to damage
OF stress.