Ice And Water Dispenser - GE Profile TPX21PRXDBB Owner's Manual

About the ice and water dispenser.
iI _ _ ii ii I
Spill Shelf
To Use the Dispenser
Press the tim of tim glass gently against tim dispenser pad.
Set the selector sxdtch to CUBES, CRUSHED ICE(on some
models) or WATER.
Tim spill shelf is not seltMraining. To reduce water
spotting, the shelf and its glJlle should be cleaned
regularly.
If no water is dispensed when the mfi/gerator is first installed, there
may be air in the water line system, PrEssthe dispenserpad for at
least two minutes to remove trapped air fr_)mthe water line and to
fill the water system, Toflush out impurities in the water line, thr_Jw
a way the first six glassfuls of water:
A light switch (on some models) turns the nightfightin
the dispenser on or off. The light also comes on when
ll_e dispenser pad is pressed. The light in the dispenser
should be replaced with a 7 watt mm,dmum bulb when it
bums out.
CAUTION: Never pu t fingers or anJ," O the_
objects into the ice crusher discharge opening.
Ice Storage Bin
Toremove:
Lib the left corner to flee tim bin flom tim shelf. Pull tim
bin straight
out
while supporting it at flont and back.
Toreplace:
Slide the bin back until the lab on tim bin locks into the
slot on the shelf. Iflhe bin does not go all the way back,
remove fl and mrn tim drive mechanism
1/4 turn. Then
push the bin back again until tim tab on tim bin locks
into tim slot on the shelf.
13