Drive Module - Zoom 607 Bass Operation Manual

Effect Parameters
DRIVE

DRIVE module

In addition to five distortion type effects, this
module is also comprised of four clean effect
types and two enhancers.
Use the VALUE [+] / [-] keys to select the effect
type and the GAIN [+] / [-] keys to adjust the gain.
Adjusts the drive module gain over the range of 1 - 30
(common to all effect types in the DRIVE module).
TE CLN (TE Clean)
High-class clean sound with prominent midrange.
FDR DRV (FDR Drive)
Drive sound simulating a built-in type tube amplifier driven to distortion.
AC DRV (AC Drive)
Overdrive sound with strong midrange.
BANDPASS ENH (Bandpass Enhancer)
Enhancer using a bandpass filter. Makes the sound more distinct.
HIPASS ENH (High-Pass Enhancer)
Enhancer using a high-pass filter, resulting in a different sonic character from the
bandpass enhancer.
CLEAN (clean type effect)
Clean sound with flat characteristics.
RICH (clean type effect)
Rich clean sound with emphasized bass range.
SLAP (clean type effect)
Clean sound suitable for the slap playing style.
EDGE (distortion effect)
Treble-rich overdrive sound.
28 ZOOM 607
BASS
Effect Parameters
DRIVE
DIST (distortion effect)
Distortion sound for hard rock.
FUZZ (distortion effect)
Wild fuzz sound.
OFF (Off)
Turns the DRIVE module off.
4 BAND EQ (4-Band Equalizer)
Allows boost or cut in the bass/middle/high/presence band. You can select
one of 50 available patterns (1 - 50).
1 - 10: Lower values result in attenuated highs and emphasized lows.
11 - 20: Lower values result in lower emphasized frequency.
21 - 24: Lower values result in emphasized midrange.
26 - 30: Higher values result in emphasized highs.
31 - 40: Higher values result in higher emphasized frequency.
41 - 50: Higher values result in emphasized presence and lows.
OFF (Off)
Turns the EQ module off.
EQ
EQ module (basic parameter)
This module contains a 4-band equalizer. Use the
VALUE [+] / [-] keys to select the EQ
characteristics.
25: Flat characteristics
DRIVE EQ
ZOOM 607 29
BASS