Table of Contents
Advertisement
SETTINGS
Communication Setup
This allows you to perform and/or change the
communication settings and select the type of Internet
connection from Cable or Wireless (built-in). This
setting is required to use BD-LIVE functions, video
streaming services and software updates that connect
to the Internet.
CAUTION
•
When a LAN cable is connected to this player, a wireless
LAN connection is not available. To use wireless LAN, do
not connect a LAN cable to this player.
NOTE
•
For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
−
IP address, netmask, gateway, DNS address
When using a LAN Cable
NOTE
•
Make sure that the LAN cable is connected to this player
if a wired Internet connection is made (See page 20). This
setting cannot be performed when a LAN cable is not
connected.
1
Press HOME to display the menu screen.
2
Press a/b to select "Settings", then press d or
ENTER.
3
Press a/b to select "Communication Setup",
then press d or ENTER.
4
Press a/b to select "Ethernet Setup (Cable)",
then press d or ENTER.
5
Press a/b to select "Change", then press
ENTER.
Current Ethernet setup info.
IP Address
: Auto Setup
Netmask
: Auto Setup
Gateway
: Auto Setup
DNS
: Auto Setup
Initialize
•
For initializing the current setting, select "Initialize",
then press ENTER.
Change
6
For setting the IP address, press c/d to select
"Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
•
If selecting "Yes": The IP address is automatically
obtained.
•
If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 46.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
7
Select "Next", then press ENTER.
•
If selecting "Yes" in the step 6, go to the step 9.
8
Enter your DNS address.
Enter your DNS address.
Primary
Secondary
•
The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 46.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
9
Select "Next", then press ENTER.
10
For testing the connection to the Internet, after
confirming the settings, press a/b to select
"Test", then press ENTER.
•
"Test" is available only when setting to obtain the IP
address automatically. "Test" cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
IP Address
: xxx xxx xxx xxx
Netmask
: xxx xxx xxx xxx
Gateway
: xxx xxx xxx xxx
DNS Address
: xxx xxx xxx xxx
MAC Address
: xx xx xx xx xx xx
Complete
•
As a result of the test, if the Internet connection fails,
enter the setup values manually.
11
Press a/b to select "Complete", then press
ENTER.
No
Next
Next
xxx xxx xxx xxx
Test
43
Advertisement
Table of Contents
