Inserting Battery Into Remote Control; Removing Battery From Remote Control - Hitachi DZMV550E Instruction Manual

INSERTING BATTERY INTO REMOTE CONTROL

Insert the provided lithium battery into remote control.
1
Slide the cover to remove it.
2
Insert the lithium battery with the positive R
terminal facing up.

REMOVING BATTERY FROM REMOTE CONTROL

1
While pushing the battery stopper, slide the
battery out.
Battery stopper
:
Warning
•
KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
•
IF SWALLOWED CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT.
•
BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
3
Slide the cover to close it.
:
Note
The life of lithium battery is approximately one year. If the
battery is discharged, no operation is possible with remote
control: Replace the battery.
Battery stopper
While pushing
battery stopper
:
Note
•
Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2025, or Duracell
DL2025. Use of another battery may present a risk of fire
or explosion.
•
Dispose of battery safely in accordance with local laws.
Do not dispose of in fire.
•
Do not short circuit the battery.
•
Do not hold the battery with the metallic tweezers.
•
Keep the battery in a dark, cool, dry place.
35