3Com ISDN Modem User Manual page 139

11 Specify which Phone port should handle the calls
associated with telephone number one.
If you plan to use the 3C882 ISDN modem's analog Phone
ports, you will want to configure voice call routing by
assigning telephone numbers to the analog ports. By default,
telephone number 1 is assigned to phone port one and
telephone number 2 is assigned to phone port 2.
For example, if the first telephone number is configured as
908 555 1212 and only the Phone Port 1 box is checked, then
calls to 908 555 1212 will only ring the analog device
attached to Phone Port 1.
12 If your ISDN line has two telephone numbers, specify
which Phone port should handle the calls associated with
telephone number two.
13 Confirm that the parameters listed in steps 6 through 12
are correct.
When these parameters are updated, the information is read
back to the screen. Check to see that the values have been
correctly entered.
14 Press [F10] to update the information in the ISDN modem.
15 Press [Esc] to return to the main menu.
Once in the main menu, exit the program.
Go to Chapter 5, "Advanced Configuration," to review the
default settings and ensure that they reflect your preferences.
If you prefer not to change the default settings, go on to
Chapter 7, "Placing and Receiving Calls."
Configuration Using DOS
D-3