Hitachi DZMV100E Instruction Manual page 125

Message
Drive heat too high
Please retry later
(1) Error Reading
Repair movie file
(2)Error occurred
Try to fix
Standby
Continue?
Use AC adapter
Cause
The temperature inside the
DVD camera/recorder is too
high, and reading or writing
of the data on disc may not
be performed normally.
It is possible that the sys-
tem cannot normally com-
plete writing of file when
power is turned off for
some reason during re-
cording or editing (delet-
ing, dividing or combining
scenes, or creating play
list). Selecting "Yes" will
automatically repair the
video file, but even if "No"
is selected, the same mes-
sage will appear when the
DVD camera/recorder is
turned on next time. (Do
not remove the disc while
the DVD camera/recorder
is recognizing it: Ignoring
this will deactivate the file
repair function.)
Scene cannot be repaired
when the DVD camera/
recorder is powered by a
battery.
Trouble Messages
Troubleshooting
Turn the DVD camera/recorder off
and wait for a while. The tempera-
ture will be effectively decreased
if the DVD camera/recorder is
placed in a well-ventilated spot.
Follow the instructions on
screen, taking note of the fol-
lowing cautions:
• Data may not be repaired,
depending on the timing
when power was turned off.
• Data may not be repaired
normally if data recorded on
another recorder is mixed in.
• The repaired data may be
different from the original re-
corded content because of
partial deletion of defective
portion.
• Since the date/time for re-
pair is added to the repaired
data (only the corrected por-
tion for partial repair), the
original date/time informa-
tion will be lost.
• Since all movies, and then
all stills, are repaired, the or-
der of recorded contents will
be lost.
(In case of message (2) only)
If the AC adapter/charger is
unavailable in handy place,
remove the disc, use the op-
posite side, or use another
disc. To repair the removed
disc, insert the disc into the
DVD camera/recorder after-
wards, and connect the AC
adapter/charger.
125