Download Print this page
EverFocus ECD230 Operation Instructions Manual
EverFocus ECD230 Operation Instructions Manual

EverFocus ECD230 Operation Instructions Manual

Everfocus color dome camera operation instructions

Advertisement

Quick Links

Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not have camera immersed in water.
2.
Do not disassemble it or place it on an unstable base.
3.
Do not touch the surface of CCD sensor by hand directly.
4.
Never face the camera toward the sun.
5.
Use proper power source otherwise the camera will not function correctly.
6.
Use the camera at temperatures within 0℃ ~ 50℃/32℉~122℉ and humidity between 20%~
80%. The input power sources is 12VDC only.
EVERFOCUS
Color Dome Camera

Operation Instructions

ECD230
Model:

Advertisement

loading

Summary of Contents for EverFocus ECD230

  • Page 1: Operation Instructions

    Use proper power source otherwise the camera will not function correctly. Use the camera at temperatures within 0℃ ~ 50℃/32℉~122℉ and humidity between 20%~ 80%. The input power sources is 12VDC only. EVERFOCUS Color Dome Camera Operation Instructions ECD230 Model:...
  • Page 2: Standard Accessories

    PREFACE These cameras are compact, full functioned CCD cameras. Their stylish appearance can be applied as per installer's ideal locations. These dome cameras can be mounted either on the ceiling or on the wall easily. The camera uses high sensitive 1/3" color interline transfer CCD sensor with DSP.
  • Page 3: Installation

    LENS AVAILABLE * Standard board lens f=3.6 mm, F=2.0 mm. * Other available lens : 4 Lens f=4.3 mm, F=2.0 mm INSTALLATION 1. Remove the plastic dome cover. 2. Loosen the two screws of the supporting bracket to remove the camera body. 3.
  • Page 4 5. Connect the BNC connector of the camera to a color monitor, or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension. 6. Connect the DC +12V regulated power source of the camera (DC Jack) to the DC 12V Power-in jack with 2 mm, center+, outer- plug.
  • Page 5: Specifications

    SPECIFICATIONS Model Pickup Device Video Format Scanning System Picture Elements Horizontal Resolution Sensitivity S/N Ratio Electronic Shutter Lens Type Back Light Comp. Auto Gain Control Auto White Balance Gamma Correction Video Output Sync. Mode Power Source Power Consumption Dimensions Weight Operating Temperature Certifications Standard Resolution...
  • Page 6 415 Oser Avenue Unit S Hauppauge, NY 11788 TEL: 631-436-5070 FAX: 631-436-5027 www.everfocus.com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

This manual is also suitable for:

Ecd230/n3w