Installation - EverFocus Esd200 Operation Instructions Manual

INSTALLATION

The horizontal view angle of the Smoke Detector Camera is 78-degree. Decide the location
to install the camera.
Full-Screen Width of View
= 1.6 X Distance between
Camera and Target
Inspect the package contents to make sure that no damage occurred during shipping.
Plug in the attached video and power cable to the camera connector.
Connect the video output of the camera to a color monitor or other video device through a 75
ohm type coaxial cable with BNC female connector at cable extension.
Connect the 12VDC regulated power source of the camera to the 12VDC Power-in jack with
2 mm, center+, outer-plug.
Adjust the direction of the lens as per needed.
2