Advertisement
Contents of Carton
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton
contents are listed below. Hardware part numbers are shown in parentheses.
QTY
DESCRIPTION
(1)
Universal Bumper Assembly
(2)
Screw, 5-16-18 x 0.750
(2)
Quick Release Pin, .50 dia. x .50 lg.
(4)
Flange Lock Nut, 5/16-18
(2)
Bumper Cap
(2)
Shoulder Screw, 5/16-18 .437 x .268
(2)
Shoulder Bolt, 3/8-16 .496 x .336
(2)
Lock Nut, 3/8-16
CONTENTS OF HARDWARE PACK
This Bumper kit is shipped with a hardware pack enclosed. This hardware pack may contain extra parts for installation on a different
rider from which you have. Please check your hardware pack against the illustration below in accordance with your model of rider as
determined in this manual.
Hardware for all 100, 600, 800 and 900 tractors
and Model Year 2007 & Newer 700 tractors
NOTE: Each item has been identified in above for ease of assembly, and the letter code assigned here is maintained in assembly
instructions.
RH = Right Hand
(#) = Quantity
LH = Left Hand
PART NO.
(683-04219A)
(710-1260A)
(714-04061)
(712-3004A)
(731-05674)
(738-0296)
(738-0143)
(712-3000)
Hardware for all 700 tractors Model Year 2006 & Prior
Figure 2-1
2
3
Advertisement
