Panasonic VIERA TH-42PZ700A Operating Instructions Manual page 37

Update system software regularly to ensure that you have latest version software.
If there is an update available, a notifi cation banner is displayed when the channel has the update information.
•
To download new software, press "OK"
If you choose not to download, press "EXIT".
■
To update automatically
Set "Auto Update Search in Standby" to "On" (p. 23)
If there is a new version software being broadcast, the TV will download this automatically.
•
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every night under the following conditions.
Standby (TV turned Off with the remote control)
Recording is not in progress.
■
To update manually
Perform "System Update Search Now" (p. 23)
If there is an update available, a notifi cation banner is displayed.
•
To download new software, press "OK"
If you choose not to download, press "EXIT".
Note
•
During downloading, do not turn Off the TV or touch any button.
(The TV is automatically activated after downloading is completed.)
HDMI connections to some Panasonic equipment allow you to interface them automatically. (p. 32)
•
This function may not work normally depending on the equipment condition.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
If you connect the equipment that has "HDAVI Control 2" function to the TV with HDMI cable, the sound from
DIGITAL AUDIO OUT terminal can be output as multi channel surround.
•
Easy playback is also available by using the remote control for Amplifi er or Player theatre. Read the manuals of
the equipment.
•
If you connect the same kind of equipment at once (for example: one DIGA to HDMI1 / another DIGA to HDMI2),
VIERA Link is available for the terminal with the smaller number.
•
"HDAVI Control 2" is the newest standard (current as of February, 2007) for Panasonic's HDAVI Control
compatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipment.
Stereo / Bilingual Sound Selection (Analogue mode)
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Stereo / Bilingual Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Regular broadcast
Type of broadcast
(Standard Audio)
No Indicator
Mode Indicator
A2(German) .......Used in Australia, Malaysia etc.
Regular broadcast
Type of broadcast
(Standard Audio)
No Indicator
Mode Indicator
Note
•
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using
the stereo / bilingual sound selection button.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
Updating the software system
Downloading (approx. 20 min.)
Downloading (approx. 20 min.)
VIERA Link "
STEREO
Regular + NICAM MONO
(MAIN
I
BILINGUAL or DUAL MONO:
MAIN
I
Control
MAIN SUB
I
I
I
NICAM STEREO
)
I
STEREO
/ SUB
I II
II
"
TM
MONO
II
II
NICAM DUAL MONO
(MAIN / SUB
I
I
)
II
II
37