PlaySafe 22-PS245 Owner's Manual And Assembly Instruction page 7

Required Parts:
Glider attachment x1
Pre-Assembled Parts:
•
The seats should be attached to the horizontal poles. These must be disassembled to complete the steps below.
•
The foot rests should be attached to the vertical poles.
Step Illustration
1
2
7
NOTE: One support bar has holes for the
slide attachment. The holes should be
positioned toward the front of the swing set.
GLIDER ASSEMBLY
Instructions
Secure the glider attachment with the V-
screw and the bolts at the squared portion
of the top bar.
Attach the two vertical poles to the glider
attachment. Start by removing the
hardware from the lower section of the
glider attachment. Align the vertical bar
with the glider attachment and re-insert the
hardware. Repeat the process for the other
side.
Vertical Poles x2 (Footrests attached)
Horizontal Poles x2 (Seats attached)
Hardware Reference
Part Ref. #: PSHW35, PSHW22
Part Ref. #: PSHW21, PSHW36
2006 Pacific Cycle, Inc.
©