This unit was developed using the expertise of professional sound engineers and working Dealer’s Name musicians. You will find that your new NADY AUDIO City CPD-1006L has superior performance and greater flexibility than any other conditioned power distribution State units in its price range.
WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: Read all instructions before using the product. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.).
Zone 6 in turn. The sequence delay time is factory set at 2 seconds, but can be factory adjusted also to 1 or 3 seconds (contact the Nady Service Department to change internal delay adjustment). The sequence for powering off will be reversed when it’s switched to “OFF”. When “ON”...
CONTROLS AND CONNECTIONS (11) (10) (9) (8) REAR PANEL POWER CORD Connect power cord to AC source (120VAC, 16A minimum) before turning unit “ON”. CHASSIS GROUND Use a wire connected from this terminal to system ground for best results and to eliminate ground loop hum.
Page 7
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.