Honda HR215SXA Owner's Manual page 51

9. MAINTENANCE
4.
5.
6.
While holding the drive clutch lever
all the way forward, check the
position of the transmission arm.
The notch on the transmission arm
should align with the index mark on
the transmission case.
If adjustment is necessary, loosen
the drive clutch cable lock nuts with
a 10 mm wrench, and move the
adjuster up or down as required.
Tighten the lock nuts, and recheck
transmission arm alignment.
TRANSMISSION
After the transmission arm is
precisely aligned, start the engine
and operate the drive clutch lever.
Check to be sure the drive clutch
lever operates properly. If the drive
clutch lever does not operate
properly after the cable is correctly
adjusted, take the mower to an
authorized Honda lawn mower
dealer for repair.
49