Connecting The Kpe To Your System - Krell Industries Reference KPE Instructions For Use Manual

Connecting the KPE to your System

INSTALLATION WITH
THE KBL, KRC–2,
or KCT
IMPORTANT
INSTALLATION WITH
OPTIONAL EXTERNAL
POWER SUPPLY
Notes
Krell KPE
The KPE can obtain power from the DC output of the Krell KBL, the
Krell KRC–2, the Krell KCT, or from the optional power supply.
1. Unplug the KBL, KRC–2, or KCT from the AC wall socket.
2. Connect the supplied DC power cable to the DC output
receptacle on the KBL, KRC–2, or KCT.
3. Connect the other end of the DC cable to the DC input on
the KPE.
Do not plug the power supply into the AC wall socket until completing
steps 1-5 below.
1. Connect the supplied DC power cable to the DC output.
2. Connect the other one of the DC power cable to the DC input
receptacle on the KPE.
Connect the output of your turntable to the input of the KPE.
3.
4. Connect the output of the KPE to a line level input on your pre-
amplifier.
5. Plug the KBL, KRC–2, or KCT to the external KPE power supply
into the AC wall socket. The blue LED on the KPE will now be illu-
minated.
Allow the Reference KPE to warm up for one minute after the initial turn on,
before selecting the phono input on your preamplifier.
All audio connections on the Reference KPE and the Standard KPE are sin-
gle-ended, via RCA connectors.
5