Panasonic TH-103VX200U Operating Instructions Manual page 49

• SYNC
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Setting Component sync signal
Confi rm that the input is set to Component input (this setting is valid only for Component input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "SYNC ON G".
• SDI THROUGH
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
OFF ON
ON: Enables active through.
OFF: Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)
is selected.
• FRAME CREATION
Displays reducing screen fl icker image for 50Hz/25Hz signal input.
OFF ON
Note:
This function activates only for 50Hz/25Hz signal input with 2D images.
• 24p SMOOTH FILM
During 2D or 3D viewing, images captured at 24 frames per second are provided in a smooth manner.
OFF ON
Note:
This function can be set only for 24p signal input with 2D or 3D images.
• 3D 24p FILM DISPLAY
For 3D images, images captured at 24 frames per second are set.
60Hz 48Hz
60Hz: Increases the number of frames to reproduce more natural movement images.
48Hz: Reproduces images close to fi lm-specifi c texture.
Note:
This function can be set only for 24p signal input with 3D images.
• HDMI RANGE
Switches the dynamic range according to the input signal from HDMI 1 to 4 terminals.
VIDEO(16-235) FULL(0-255)
VIDEO(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
FULL(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
AUTO: Switches the dynamic range automatically between "VIDEO(16-235)" and "FULL(0-255)" according to the input signal.
Note:
This function can be set only for HDMI 1 to 4 terminal input.
AUTO
SET UP menu
49