Before Each Use - Craftsman 917.276810 Operator's Manual

MAINTENANCE
BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE
SCHEDULE EAC. 8 25 so loo SEASO. STORAGE
USE HOU.S .OURS .OURS HOURS
Check Brake Operation
Check Tire Pressure
f
a Check Operator Presence & ROS Systern_
A Check for Loose Fasteners
C Check/Replace Mower Blades
[ Lubrication Chart
0 Check Battery Level
R
Clean Battery and Terminals
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level
Change Engine Oil (with oil filter
Change Engine Oil (without oil filter
_ Clean Air Filter
G clean Air Screen
Inspect Muffler/Spark Arrester
N Replace Oil Filter (If equipped)
E clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
__ Re lace Fuel Filter
i/ i,/ V"
_1,2
i/
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to Q S_
operator abuse or negligence. To receive Zerk
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments @Engine .
described in the Service and Adjustments
section of this manual. "
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
LUBRICATION CHART
-- @ Spindle
Zerk
@Front Wheel ,-
Bearing
Zerk
@Front Wheel
Bearing Zerk
_SAE 30 or 10w30 Motor Oil
@General Purpose Grease
_PRefer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
17